Cardinal Utility & Consumer Equilibrium: Class 11 Notes

CBSE Class 11 Economics (Code 030) • Unit 5: Consumer’s Equilibrium and Demand (NCERT 2026–27)

Quick Concept Box: Cardinal Utility & Consumer’s Equilibrium

Cardinal Utility Approach (Alfred Marshall): Assumes that satisfaction (utility) derived from consuming a good can be measured numerically in exact cardinal units called utils (1, 2, 3…) and expressed in monetary terms via the Marginal Utility of Money (MUm).

Law of Diminishing Marginal Utility (DMU): As a consumer consumes more and more standard units of a commodity continuously (other things remaining constant), the marginal utility derived from each successive unit goes on declining.

Consumer’s Equilibrium: A state of maximum satisfaction where a rational consumer allocates his given money income across goods at given market prices and has no tendency to change his consumption bundle.

Key NCERT Equilibrium Conditions & Formulas:

Marginal Utility: MUn = TUn − TUn−1 = ΔTU ÷ ΔQ

Single Commodity Condition: MUx / Px = MUm  (When MUm = 1 util/₹, simply MUx = Px)

Two-Commodity Condition (Law of Equi-Marginal Utility): MUx / Px = MUy / Py = MUm  subject to  Px·Qx + Py·Qy = Money Income (M)

CBSE Exam Weightage & 2026–27 Scoring Tip: Unit 5 carries 14 Marks total. The “Consumer Reaction when MUx/Px > MUy/Py” question is a staple 4-mark CBSE board question — always link the reallocation step explicitly to the Law of Diminishing Marginal Utility (DMU) to secure full marks.

Single-Commodity Schedule, Equilibrium Diagram & Two-Commodity Extension

1. Single-Commodity Utility Schedule: Assume a rational consumer purchases Good X at a constant market price Px = ₹4 per unit and values ₹1 at MUm = 1 util (so 1 util = ₹1):

Units of Good X (Q) Total Utility
(TU in utils)
Marginal Utility
(MUx in ₹ / utils)
Market Price
(Px in ₹)
Net Gain / Surplus
(MUx − Px)
Consumer Behaviour
1 10 10 4 +6 Buy more (MUx > Px)
2 18 8 4 +4 Buy more (MUx > Px)
3 24 6 4 +2 Buy more (MUx > Px)
4 28 4 4 0 Equilibrium (MUx = Px)
5 30 2 4 −2 Cut back (MUx < Px)
6 30 0 4 −4 Point of Satiety (TU Max)
Single-Commodity Consumer’s Equilibrium (MUₓ = Pₓ) Consumer Surplus (MUₓ > Pₓ : Buy More) Loss Zone (MUₓ < Pₓ) O Quantity of Good X (Units) Marginal Utility (MUₓ) & Price (Pₓ) in ₹ 1 2 3 4 (Q*) 5 6 2 ₹4 6 8 10 12 Pₓ = ₹4 MUₓ Curve Equilibrium E (4, ₹4) MUₓ = Pₓ (Max Satisfaction) Equilibrium Key MUₓ (Diminishing MU) Price Line (Pₓ = ₹4) Consumer Surplus

2. Two-Commodity Equi-Marginal Utility Schedule: Suppose Money Income M = ₹20, Px = ₹4, and Py = ₹2. The consumer compares marginal utility per rupee spent on both goods:

Units (Q) MUx (utils) MUx / Px (Px = ₹4) MUy (utils) MUy / Py (Py = ₹2)
1 20 5 12 6
2 16 4 10 5
3 12 3 (Qx* = 3) 8 4
4 8 2 6 3 (Qy* = 4)
5 4 1 4 2

Check Budget Constraint at Equilibrium: Buying 3 units of X and 4 units of Y satisfies both conditions: (i) MUx/Px = MUy/Py = 3 utils/₹, and (ii) Total Expenditure = (3 × ₹4) + (4 × ₹2) = ₹12 + ₹8 = ₹20 (exact income exhausted, yielding maximum TU = 48 + 36 = 84 utils).

Diagram Observation & Schedule Analysis

  • Left of Equilibrium (Q < 4, MUx > Px): For units 1, 2, and 3, marginal benefit (₹10, ₹8, ₹6) exceeds the ₹4 price paid, generating positive Consumer Surplus (+₹6, +₹4, +₹2 = ₹12 total discrete surplus). The rational consumer keeps buying more.
  • At Equilibrium Point E (Q = 4, MUx = Px = ₹4): The marginal benefit of the 4th unit exactly equals the price paid. Net gain on the last unit is zero, and cumulative satisfaction is maximised.
  • Right of Equilibrium (Q > 4, MUx < Px): The 5th unit yields only ₹2 worth of utility while costing ₹4 (a net loss of −₹2). Buying beyond Q = 4 lowers net welfare, so the consumer reduces consumption back to 4 units.
  • Point of Satiety (Q = 6): Where MUx hits the X-axis (MU = 0), Total Utility reaches its absolute maximum (30 utils).

3-Step Exam Explanation (How to Write a Full-Mark 4/6-Mark Answer)

  1. Step 1 — State the Equilibrium Condition & Assumptions: Write MUx = Px (single good) or MUx/Px = MUy/Py = MUm (two goods), mentioning constant MUm and the Law of DMU.
  2. Step 2 — Present Schedule + Labelled Graph: Plot downward-sloping MUx intersecting horizontal Px at E, shading Consumer Surplus left of E.
  3. Step 3 — Prove Disequilibrium Self-Correction: Always explain both cases — why the consumer buys more when MUx > Px (causing MUx to fall via DMU) and cuts back when MUx < Px (causing MUx to rise) until equality is restored!

Distinction Table: Total Utility (TU) vs. Marginal Utility (MU)

Basis of Distinction Total Utility (TU) Marginal Utility (MU)
1. Meaning Sum total of satisfaction derived from consuming all units of a commodity. Additional satisfaction gained from consuming one more unit of a commodity.
2. Formula TUn = ΣMU = MU1 + MU2 + … + MUn MUn = TUn − TUn−1 = ΔTU / ΔQ
3. Behaviour as Q Rises Increases at a diminishing rate, reaches a maximum, and then begins to fall. Continuously falls — remains positive, becomes zero, and then turns negative.
4. At Point of Satiety TU is at its maximum and constant (30 utils at Q = 6). MU is exactly zero (MU = 0 at Q = 6).
5. Sign Values Always remains positive in relevant consumption ranges. Can be positive, zero, or negative (disutility after satiety).

Solved CBSE Numerical (4 Marks): Two-Commodity Consumer Equilibrium & Reaction

Question: A consumer consumes only two goods X and Y. At her current consumption bundle, MUx = 24 utils, Px = ₹4, MUy = 25 utils, and Py = ₹5. Is the consumer in equilibrium? If not, explain step-by-step how she will react to restore equilibrium.

Step 1 — Given Values:
MUx = 24 utils,   Px = ₹4,   MUy = 25 utils,   Py = ₹5.

Step 2 — Equilibrium Condition Formula:
Under the two-commodity cardinal approach (Law of Equi-Marginal Utility), equilibrium requires:
MUx / Px = MUy / Py

Step 3 — Calculation of Marginal Utility per Rupee:
• Marginal utility per rupee spent on Good X:   MUx / Px = 24 ÷ 4 = 6 utils per ₹
• Marginal utility per rupee spent on Good Y:   MUy / Py = 25 ÷ 5 = 5 utils per ₹

Step 4 — Comparison & Consumer Reaction:
Since 6 > 5, we have MUx / Px > MUy / Py. Therefore, the consumer is NOT in equilibrium because she derives greater satisfaction per rupee from Good X than from Good Y.
To maximise satisfaction, she will reallocate her budget: she will buy MORE of Good X and buy LESS of Good Y.

Concluding Statement (Role of DMU): By the Law of Diminishing Marginal Utility, consuming more of Good X causes MUx to fall (lowering MUx/Px), while consuming less of Good Y causes MUy to rise (raising MUy/Py). This adjustment continues until MUx / Px = MUy / Py is restored at consumer’s equilibrium.

10 CBSE-Pattern Practice Questions (2026–27 Exam Drill)

Q1 (Competency MCQ): When Total Utility (TU) is increasing at a diminishing rate, Marginal Utility (MU) must be:

(a) Increasing   (b) Constant   (c) Decreasing but positive   (d) Negative

Show Answer

Correct Answer: (c) Decreasing but positive. MU is the rate of change (slope) of TU; when MU is positive yet falling, TU rises at a diminishing rate.

Q2 (Competency MCQ): A consumer buys a good at Px = ₹5. If MUx = 20 utils and MUm = 4 utils per rupee, the consumer is:

(a) In equilibrium   (b) Buying too few units   (c) Buying too many units   (d) At the point of satiety

Show Answer

Correct Answer: (a) In equilibrium. Check the condition: MUx / Px = 20 ÷ 5 = 4 utils/₹, which exactly equals MUm = 4 utils/₹.

Q3 (Competency MCQ): If Total Utility from 3 apples is 35 utils and from 4 apples is 41 utils, what is the Marginal Utility of the 4th apple?

(a) 76 utils   (b) 10.25 utils   (c) 6 utils   (d) 4 utils

Show Answer

Correct Answer: (c) 6 utils. MU4 = TU4 − TU3 = 41 − 35 = 6 utils.

Q4 (Competency MCQ): Which assumption is strictly required for the Law of Diminishing Marginal Utility to hold?

(a) Units consumed are tiny non-standard drops   (b) Consumption is continuous without long time gaps   (c) Consumer’s tastes keep changing rapidly   (d) Price of the commodity keeps rising

Show Answer

Correct Answer: (b) Consumption is continuous without long time gaps. Standard homogeneous units, continuous consumption, and constant tastes/income are essential assumptions of DMU.

Q5 (Competency MCQ): If Px falls suddenly while the consumer was initially in equilibrium (MUx = Px), the immediate disequilibrium state and consumer response will be:

(a) MUx < Px; buy less X   (b) MUx > Px; buy more X   (c) MUx = 0; stop buying X   (d) No change in quantity bought

Show Answer

Correct Answer: (b) MUx > Px; buy more X. A lower price makes marginal benefit exceed price, motivating the consumer to buy more X until MUx falls to the new lower price (explaining the Law of Demand!).

Q6 (Assertion – Reason):
Assertion (A): When Marginal Utility becomes negative, Total Utility starts declining.
Reason (R): Total Utility is the cumulative sum of Marginal Utilities of all units consumed.
Options: (a) Both A and R are true and R is the correct explanation of A.   (b) Both A and R are true but R is not the correct explanation of A.   (c) A is true but R is false.   (d) A is false but R is true.

Show Answer

Correct Answer: (a) Both A and R are true and R is the correct explanation of A. Adding a negative MU to the running sum (ΣMU) directly reduces Total Utility.

Q7 (Assertion – Reason):
Assertion (A): A rational consumer always consumes up to the point of satiety (where MU = 0) to maximise welfare.
Reason (R): Goods in the market have a positive price, so equilibrium stops where MUx = Px (> 0).
Options: (a) Both A and R are true and R is the correct explanation of A.   (b) Both A and R are true but R is not the correct explanation of A.   (c) A is true but R is false.   (d) A is false but R is true.

Show Answer

Correct Answer: (d) A is false but R is true. Consumers consume up to MU = 0 only if a good is completely free (Px = 0); when Px > 0, stopping at MUx = Px maximises net satisfaction.

Q8 (Diagram / Data Interpretation): Refer to the SVG diagram and Single-Commodity Schedule above. If the market price of Good X rises from ₹4 to ₹6 per unit, what will be the new equilibrium quantity Q*, and what happens to the shaded Consumer Surplus area?

Show Answer

Answer: At Px = ₹6, the new horizontal price line intersects MUx where MUx = 6, which occurs at Q* = 3 units. Equilibrium quantity falls from 4 to 3 units, and the shaded Consumer Surplus triangle shrinks significantly (discrete surplus drops from ₹12 to ₹6).

Q9 (Diagram / Data Interpretation): From the Two-Commodity Schedule above (Px = ₹4, Py = ₹2), why is the bundle (2 units of X, 3 units of Y) NOT the consumer’s equilibrium even though MUx/Px = MUy/Py = 4 utils/₹?

Show Answer

Answer: Total expenditure on (2X, 3Y) is (2 × ₹4) + (3 × ₹2) = ₹8 + ₹6 = ₹14, leaving ₹6 of the ₹20 budget unspent! Spending that remaining ₹6 on 1 more X (₹4) and 1 more Y (₹2) increases Total Utility from 66 utils to 84 utils at (3X, 4Y).

Q10 (Short-Answer Model Solution — 3 Marks): State the three key points of relationship between Total Utility (TU) and Marginal Utility (MU).

Show Answer
  1. When MU is positive (MU > 0) and falling: TU increases at a diminishing rate (e.g., from 10 to 28 utils in units 1–4).
  2. When MU is zero (MU = 0): TU reaches its maximum point and stays constant — known as the Point of Satiety (TU = 30 at Q = 6).
  3. When MU becomes negative (MU < 0): TU starts declining because further consumption causes dissatisfaction (disutility).

🏆 Interactive Concept & Board Practice Hub

Test your understanding with instant-feedback MCQs, solved CBSE Board PYQs, and key mathematical identities.

🎯 CBSE Core Takeaways & PDF Study Kit

This chapter contains essential board exam concepts. Review formulas and PYQs in the practice hub above. You can also print or save this page as a clean, distraction-free PDF for offline revision.

Dr. Akash Chouhan
Verified Educator

Written by Dr. Akash Chouhan

PhD in Economics and PGT Educator. With over 15+ years of experience, Dr. Akash specializes in simplifying complex macroeconomic concepts for CBSE Class 12, CUET, and UGC NET aspirants.

View Full Credentials →