Law of Variable Proportions: TP, AP & MP (Class 11 Notes)
1. Quick Concept Box: Production Function & Law of Variable Proportions
NCERT Definition: A Production Function expresses the technological relationship between physical inputs and maximum physical output: Q = f(L, K). In the short run (where at least one factor like land/capital is fixed), the Law of Variable Proportions (Returns to a Factor) states that as more units of a variable input (Labour) are combined with fixed inputs, Total Product (TP) initially increases at an increasing rate, then increases at a diminishing rate, and eventually falls (MP turns negative).
Key Short-Run Production Formulae:
- Total Product (TP): TP = ΣMP = AP × L (Total physical output produced by L units of variable input)
- Average Product (AP): AP = TP ÷ L (Output per unit of variable input)
- Marginal Product (MP): MPn = TPn − TPn−1 = ΔTP ÷ ΔL (Additional output from one extra unit of labour)
CBSE 2026–27 Exam Weightage & Scoring Tip: Core topic of Unit 3: Producer Behaviour and Supply (15 Marks). The 6-mark Law of Variable Proportions (Schedule + Stacked TP/MP Diagram + Reasons for all 3 Stages) is one of the highest-probability questions in Class 11 final exams. Always align Inflection Point I vertically with MP maximum, and TP maximum (M) vertically with MP = 0!
2. Production Schedule, Stacked TP/AP/MP SVG Diagram & Stage Analysis
Table 2: Law of Variable Proportions Schedule (Fixed Land = 1 Acre)
| Fixed Factor: Land (Acre) | Variable Factor: Labour (L) | Total Product (TP) | Average Product (AP = TP/L) | Marginal Product (MP = ΔTP) | Stage / Phase of Production |
|---|---|---|---|---|---|
| 1 | 1 | 10 | 10.0 | 10 | Stage I: Increasing Returns (TP rises at increasing rate; MP rises to max) |
| 1 | 2 | 24 | 12.0 | 14 | |
| 1 | 3 | 39 (Point I) | 13.0 | 15 (Max MP) | |
| 1 | 4 | 52 | 13.0 (Max AP) | 13 (AP = MP) | Stage II: Diminishing Returns (Rational Stage of Operation) (TP rises at diminishing rate to max; MP ≥ 0) |
| 1 | 5 | 60 | 12.0 | 8 | |
| 1 | 6 | 60 (Max M) | 10.0 | 0 (MP = 0) | |
| 1 | 7 | 56 (Falls) | 8.0 | −4 (MP < 0) | Stage III: Negative Returns (TP falls; MP becomes negative) |
Diagram Observation & Schedule Analysis (TP–MP & AP–MP Relationships)
- Stage I — Increasing Returns (L = 1 to 3): TP rises at an increasing rate (10 → 24 → 39) up to the Inflection Point I (3, 39), while MP rises continuously from 10 to its peak of 15. Reasons: Fuller utilisation of the fixed factor (land) and improved division of labour/specialisation.
- Stage II — Diminishing Returns (L = 4 to 6, Shaded Rational Stage): TP continues rising but at a diminishing rate (39 → 52 → 60) until it reaches its maximum at M (6, 60). MP falls steadily (13 → 8 → 0) while remaining non-negative. At L = 4 (Point K), MP cuts AP from above at AP’s maximum (AP = MP = 13). Reasons: Crossing the optimum factor ratio and imperfect substitutability between fixed and variable factors.
- Stage III — Negative Returns (L = 7 onwards): Adding the 7th worker reduces TP from 60 to 56, making MP negative (−4). Reasons: Overcrowding/excessive coordination challenges on fixed land (too many cooks spoil the broth).
- Why Stage II Is the Rational Stage: A profit-maximising producer will never stop in Stage I (additional workers still raise efficiency and total output rapidly) and will never enter Stage III (extra workers actively reduce total output while adding to wage bills).
3-Step Exam Explanation (How to Score Full 6/6 Marks in CBSE)
- Step 1 — Statement & Assumptions: State the Law of Variable Proportions clearly and note its two NCERT assumptions: (i) constant state of technology, and (ii) at least one factor is fixed in the short run.
- Step 2 — Schedule + Vertically Aligned Diagram: Reproduce the 7-row Labour–TP–MP schedule and draw the stacked TP (top) and MP (bottom) curves with vertical dotted lines connecting I ↔ MP Max and M ↔ MP = 0.
- Step 3 — Explain All 3 Phases + Economic Reasons: Dedicate one crisp paragraph to each phase (Increasing, Diminishing, Negative Returns), explicitly stating both the curve behaviour and the economic cause, and conclude why a rational producer operates in Stage II.
3. Distinction Table: Returns to a Factor (Short Run) vs. Returns to Scale (Long Run)
| Basis of Distinction | Returns to a Factor (Short Run) | Returns to Scale (Long Run) |
|---|---|---|
| 1. Meaning | Output response when only variable factors change while fixed factors stay constant. | Output response when all factors of production are increased simultaneously in the same proportion. |
| 2. Time Period | Applies strictly to the Short Run. | Applies strictly to the Long Run. |
| 3. Factor Proportion | Changes with every extra unit of variable input (hence “Variable Proportions”). | Remains constant (e.g., both Labour and Capital double together). |
| 4. Scale of Production | Plant size / scale of production does not change. | Overall scale of production changes. |
| 5. Stages / Types | Increasing, Diminishing, and Negative Returns to a Factor. | Increasing, Constant, and Decreasing Returns to Scale (economies/diseconomies of scale). |
4. Solved CBSE Numerical (6 Marks — Missing-Value TP/AP/MP Table)
Problem: Complete the following short-run production table by finding all missing values of TP, AP, and MP, and identify the three phases of the Law of Variable Proportions with one economic reason for each phase.
Given Partial Data: L = 1 (MP = 8); L = 2 (TP = 20); L = 3 (AP = 12); L = 4 (MP = 10); L = 5 (TP = 46); L = 6 (MP = −4).
Formulae Used: TPn = TPn−1 + MPn; TP = AP × L; AP = TP ÷ L; MPn = TPn − TPn−1.
Step-by-Step Calculation:
- L = 1: TP1 = MP1 = 8; AP1 = 8 ÷ 1 = 8.0.
- L = 2: MP2 = 20 − 8 = 12; AP2 = 20 ÷ 2 = 10.0.
- L = 3: TP3 = AP3 × 3 = 12 × 3 = 36; MP3 = 36 − 20 = 16.
- L = 4: TP4 = TP3 + MP4 = 36 + 10 = 46; AP4 = 46 ÷ 4 = 11.5.
- L = 5: MP5 = 46 − 46 = 0; AP5 = 46 ÷ 5 = 9.2.
- L = 6: TP6 = 46 + (−4) = 42; AP6 = 42 ÷ 6 = 7.0.
| Labour (L) | TP | AP | MP | Phase Identified |
|---|---|---|---|---|
| 1 | 8 | 8.0 | 8 | Phase I (Increasing Returns) |
| 2 | 20 | 10.0 | 12 | Phase I (Increasing Returns) |
| 3 | 36 | 12.0 | 16 | Phase I ends (MP max = 16) |
| 4 | 46 | 11.5 | 10 | Phase II (Diminishing Returns) |
| 5 | 46 | 9.2 | 0 | Phase II ends (TP max, MP = 0) |
| 6 | 42 | 7.0 | −4 | Phase III (Negative Returns) |
Concluding Statement: Phase I operates from L = 1 to 3 (better utilisation of fixed factor & specialisation); Phase II operates from L = 4 to 5 (crossing optimum factor ratio; rational operating zone); and Phase III begins at L = 6 (overcrowding and managerial inefficiency cause MP to turn negative at −4).
5. 10 CBSE-Pattern Practice Questions (With Instant Answers)
Part A: Competency-Based MCQs (Q1–Q5)
Q1. When Total Product (TP) reaches its maximum, Marginal Product (MP) is: (Show Answer)
(a) Maximum (b) Zero (c) Negative (d) Equal to Average Product
Answer: (b) Zero. When TP stops increasing and hits its maximum (Point M at L = 6), the slope of TP becomes zero, so MP = 0.
Q2. As long as Marginal Product (MP) is greater than Average Product (AP), Average Product must be: (Show Answer)
(a) Rising (b) Falling (c) Constant (d) Negative
Answer: (a) Rising. Just like a student’s latest score above their cumulative average pulls the average up, MP > AP forces AP to rise.
Q3. Which of the following statements about Average Product (AP) and Marginal Product (MP) is ALWAYS true? (Show Answer)
(a) AP can be negative (b) MP can never be zero (c) AP can never be zero or negative as long as TP > 0 (d) MP cuts AP from below
Answer: (c) AP can never be zero or negative as long as TP > 0. Since AP = TP / L and both TP > 0 and L > 0, AP always stays positive, whereas MP can be zero or negative.
Q4. In which stage of the Law of Variable Proportions will a rational producer choose to operate? (Show Answer)
(a) Stage I only (b) Stage II (Diminishing Returns) (c) Stage III (Negative Returns) (d) Either Stage I or Stage III
Answer: (b) Stage II (Diminishing Returns). In Stage II, both fixed and variable factors are utilised productively and MP remains positive until TP reaches its peak.
Q5. The point on the TP curve where TP stops increasing at an increasing rate and begins increasing at a diminishing rate is called: (Show Answer)
(a) Break-even point (b) Point of Inflection (c) Shut-down point (d) Point of satiety
Answer: (b) Point of Inflection. At Point I (L = 3, TP = 39), TP changes curvature from convex to concave, corresponding directly to maximum MP (= 15).
Part B: Assertion (A) & Reason (R) Questions (Q6–Q7)
Options: (A) Both A and R are true and R is the correct explanation of A. (B) Both A and R are true but R is not the correct explanation of A. (C) A is true but R is false. (D) A is false but R is true.
Q6. Assertion (A): When Marginal Product falls but remains positive, Total Product still increases. Reason (R): Marginal Product measures the addition to Total Product from one extra unit of variable input. (Show Answer)
Answer: (A) Both A and R are true and R is the correct explanation of A. Even if MP declines (e.g., 13 → 8), adding a positive number still raises TP (39 → 52 → 60), though at a diminishing rate.
Q7. Assertion (A): The Law of Variable Proportions operates in the long run when all factors are variable. Reason (R): In the short run, factor proportions change because fixed factors cannot be altered. (Show Answer)
Answer: (D) A is false but R is true. The Law of Variable Proportions is strictly a short-run law; in the long run, Returns to Scale operates.
Part C: Diagram & Data Interpretation Questions (Q8–Q9)
Q8. Referring to Table 2 and the SVG diagram, at what unit of Labour does the MP curve intersect the AP curve? Verify the values of AP and MP at that point. (Show Answer)
Answer: MP intersects AP from above at Labour = 4 units (Point K). At L = 4, TP = 52, so AP = 52 ÷ 4 = 13, and MP = 52 − 39 = 13. Thus AP = MP = 13 at AP’s maximum.
Q9. Look at the shaded green region (Stage II) in the SVG diagram. Between which two units of Labour does TP rise at a diminishing rate, and what happens immediately after L = 6? (Show Answer)
Answer: TP rises at a diminishing rate between L = 3 (Inflection Point I, TP = 39) and L = 6 (Point M, TP = 60). Immediately after L = 6 (at L = 7), Stage III begins: MP turns negative (−4) and TP falls from 60 to 56 units.
Part D: Short-Answer CBSE Model Solution (Q10 — 4 Marks)
Q10. State the four key relationships between Average Product (AP) and Marginal Product (MP) in the short run. (Show Model Answer)
- When MP > AP, AP rises: In Stage I (L = 1 to 3), MP lies above AP (e.g., MP = 15 > AP = 13), pulling AP upward.
- When MP = AP, AP is at its maximum: At Point K (L = 4), MP intersects AP from above at AP’s peak (AP = MP = 13).
- When MP < AP, AP falls: Beyond L = 4, MP lies below AP (e.g., MP = 8 < AP = 12), pulling AP downward.
- MP can be zero or negative, but AP stays positive: At L = 6, MP = 0 (AP = 10); at L = 7, MP = −4 while AP remains positive at 8.
🏆 Interactive Concept & Board Practice Hub
Test your understanding with instant-feedback MCQs, solved CBSE Board PYQs, and key mathematical identities.
🎯 CBSE Core Takeaways & PDF Study Kit
This chapter contains essential board exam concepts. Review formulas and PYQs in the practice hub above. You can also print or save this page as a clean, distraction-free PDF for offline revision.
✨ Practice 1,885+ Sliding MCQs in 3D Portal
Revise all 45+ CBSE Class 11 & 12, CUET, and UGC NET chapters with instant answers & progress tracking.
Launch 3D Study Portal →Looking for other economic thinkers?
Explore summaries, theories, and MCQs for all 21 foundational economists in our central repository.
View Master Economists Index →Master Class 12 Macroeconomics?
Access complete notes on National Income, Money & Banking, AD-AS, and Government Budget.
Explore Macroeconomics Hub →Studying Indian Economic Development?
Review chapter summaries on LPG reforms, human capital formation, and comparative development experiences.
Explore IED Hub →